What does the code mean IE?
IE means water didn't reach the required level within the fill time.
Code meanings can vary by model, market and appliance type. Always check your model's user manual. The same letters can mean something different on dishwashers or refrigerators.
Related symptoms
- Very slow or no filling
- Program stops at the start
- Valve hums without flow
Possible causes
- Tap closed or partly open
- Low water pressure (common with rooftop tanks)
- Clogged inlet screen
- Kinked inlet hose
- Inlet valve or level-sensor fault
Safe checks you can do
- Open the washer tap fully
- Check pressure at a nearby tap and the rooftop tank level
- Straighten the hose
- Clean the inlet screen with tap closed and power off
If pressure is good, the screen is clean and IE keeps returning.
When do you need a technician?
The technician tests the inlet valve, level sensor and board and assesses household pressure.
Related error codes
FAQ
Can rooftop-tank pressure cause IE?
Yes—slow filling can exceed the allowed time.
Is IE a permanent fault?
Usually not; many cases are solved by opening the tap and cleaning the screen.
Related guides
LG Washer Not Filling: The IE Code and Low Water Pressure in Jordanian Homes
LG washer not taking water, filling slowly or showing IE? Low pressure from rooftop tanks, clogged inlet screens and inlet-valve faults explained with safe checks.
LG Wash Cycle Taking Longer Than Usual: Why Does Time Increase?
Why your LG washer cycle runs long or the timer stalls: rebalancing, suds, low water pressure, heating and smart programs that adjust time.
The code meaning was reviewed against these public LG support pages: